Researchers develop flexible, colorful films made entirely from cellulose, combining the optical properties of nanocrystals with the strength of nanofibers for sustainable electronics.
Lucid says new updates make the Air Pure electric sedan beat Tesla and everybody else when it comes to powertrain efficiency.
This remarkable miniature rotorcraft is so lightweight and efficient that it can lift its own mass given nothing but sunlight. The entire thing weighs about as much as four paperclips, and it can fly all day if the sun’s shining.
Researchers at China’s Beihang University and the Center of Advanced Aero-Engine, have unveiled CouloumbFly, a palm-sized miniature rotorcraft that weighs just 4.21 g (0.15 oz) – yet still boasts a rotor diameter of 20 cm (7.9 in), making it around 600 times lighter than any other comparable small solar-powered drone.
Continue reading “Ultra-light electrostatic VTOL drone flies indefinitely in sunlight” »
A team of researchers, affiliated with UNIST has made a significant breakthrough in developing an eco-friendly dry electrode manufacturing process for lithium-ion batteries (LIBs). The new process, which does not require the use of harmful solvents, enhances battery performance while promoting sustainability.
The findings of this research have been published in the July 2024 issue of Chemical Engineering Journal.
Led by Professor Kyeong-Min Jeong in the School of Energy and Chemical Engineering at UNIST, the research team has introduced a novel solvent-free dry electrode process using polytetrafluoroethylene (PTFE) as a binder. This innovative approach addresses the challenges associated with traditional wet-electrode manufacturing methods, which often result in non-uniform distribution of binders and conductive materials, leading to performance degradation.
Due to rising environmental concerns, global energy production is shifting from fossil fuels to sustainable and renewable energy systems such as solar and wind power. Despite their advantages, they have two significant weaknesses: volatile power production and irregular supply. Hence, they are augmented with energy storage systems (ESSs).
Lithium-ion batteries are at the forefront of ESSs but are prone to fires due to flammable electrolytes and lithium-based materials. The flowless zinc-bromine battery (FLZBB), which uses non-flammable electrolytes, is a promising alternative, offering cost-effectiveness and a simple battery platform.
An FLZBB consists of a positive electrode, a negative electrode, an electrolyte, and a separator to keep the electrodes apart. Unlike conventional zinc-bromine batteries, the electrolyte in FLZBB does not need to be pumped and is instead held in a gel-like container. Graphite felt (GF) is widely used as an electrode in many redox batteries due to its stability in acidic electrolytes.
Elon Musk’s Neuralink company is building a $14.7 million site in Austin, Texas.
According to MYSA, Neuralink plans to build new offices in Central Texas. A recent filing with the Texas Department of Licensing and Regulation (TDLR) revealed that Neuralink’s new offices will be at 2,200 Caldwell Lane, Del Valle, TX 78617.
The filings also hint that Neuralink is working on a multi-building campus within a property that stretches 37 acres. The property is located 20 minutes away from Tesla Giga Texas.
Two 650-foot-tall (200-m) towers have risen in China’s Gansu Province. Combined with an array of 30,000 mirrors arranged in concentric circles, the new facility is expected to generate over 1.8 billion kilowatt-hours of electricity every year.
While photovoltaic panels that directly convert sunlight to electricity are what most people think of when they hear the term “solar power,” there is another method of harvesting the Sun’s power that’s been steadily developing since the early 1980s. Known as solar thermal or concentrated solar power (CSP), these systems rely on mirrors known as heliostats to bounce sunlight to a central gathering point. There, the concentrated beams heat a transfer fluid that in turn heats a working fluid. This fluid then evaporates, turns a turbine, and generates electricity.
Continue reading “World’s first dual-tower solar thermal plant boosts efficiency by 24%” »
An intense discussion is now going on at the International Seabed Authority (ISA), starting in March 2024, and proceeding up to August, for its various instances, committees, and general assembly. The most critical point concerns the call for licenses, which are being advanced by several commercial mining entities, to explore deep sea grounds, seeking rare minerals highly in demand, fueling the energy and green transitions worldwide. Clean energy technologies require more materials, such as copper, lithium, nickel, cobalt, aluminum, and rare earth elements, than fossil fuel-based technologies. Demand for critical minerals could surge 450% by 2050 to meet Paris Agreement climate goals[1]. The deep sea, particularly in the form of polymetallic nodules (PMNs), contains significant cobalt resources. Estimates suggest that by 2035, deep-sea mining of PMNs could produce 61,200 tons of cobalt per year, which could account for up to 50% of current annual global cobalt demand[2].
For the first time, ISA is considering the revision of deep-sea mineral exploitation regulations [3]. Commercial deep-sea mining has attracted increased attention, particularly owing to potential oceanic challenges, including pollution, overfishing, biodiversity, and habitat loss, acidification, rising water temperatures, and climate change. Those favoring commercial mining highlight the need for a supply of materials necessary for global energy transition. Recent meetings in Kingston, Jamaica, have focused on revising the draft regulations for deep-sea mineral exploitation. While some progress has been made, several areas of disagreement remain, particularly regarding environmental protections and the speed of issuing commercial permits. The ISA is aiming to finalize the new regulations by July 2025, but there are concerns that this deadline may not be met.
On the commercial side, The Metals Company (TMC), Canada, anticipates submitting an application for a mining exploitation license in 2024, potentially starting mining operations in 2025, even before the regulations are fully in place. While ISA has not granted any commercial licenses for deep-sea mining, some countries are moving forward independently. Norway already passed a bill in January 2024, which authorizes prospecting for deep-sea minerals, accelerating the hunt for the precious metals that are in high demand for green technologies. Environmental scientists have warned such oceanic exploitation could be devastating for marine life. The outlook concerns Norwegian waters, nevertheless, agreements on mining in international waters could also be reached this year.
In the search for more efficient and sustainable energy generation methods, a class of materials called metal halide perovskites have shown great promise. In the few years since their discovery, novel solar cells based on these materials have already achieved efficiencies comparable to commercial silicon solar cells.
Tesla Energy secured a $375 million Megapack contract in Australia. The new Tesla Megapack contract will help build a 415 MW/1660 MWh battery Down Under, one of the largest four-hour batteries in the world.
Tesla Energy will supply Megapacks to Akaysha Energy’s Orana Battery Energy Storage System (BESS). The Orana project is located in New South Wales within Central West Orana’s Renewable Energy Zone (REZ).
We are very pleased to announce the successful closing of the debt financing of the Orana project as we move into construction on Akaysha’s first four-hour BESS to date. As the largest standalone BESS financing globally, this achievement not only secures the capital for Orana’s construction but also highlights the strong support we have received from both local and international banks, as well as from BlackRock. Their commitment to advancing the energy transition in Australia and internationally has been pivotal to reaching this milestone.
