Lifeboat Foundation

However, a breakthrough by researchers at UVA’s College and Graduate School of Arts & Sciences, the California Institute of Technology and the U.S. Department of Energy’s Argonne National Laboratory, Lawrence Berkeley National Laboratory and Brookhaven National Laboratory could eliminate a critical obstacle from the process, a discovery that represents a giant stride toward a clean-energy future.

One way to harness solar energy is by using solar electricity to split water molecules into oxygen and hydrogen. The hydrogen produced by the process is stored as fuel, in a form that can be transferred from one place to another and used to generate power upon demand. To split water molecules into their component parts, a catalyst is necessary, but the catalytic materials currently used in the process, also known as the oxygen evolution reaction, are not efficient enough to make the process practical.

India is getting to work on what will be the largest renewable energy project in the world. Prime Minister Narendra Modi laid the foundation this week — physically — for the 30 gigawatt (GW) wind and solar power project being built in his home state of Gujarat, India.

It was not that long ago that 30 megawatts was a large renewable energy power plant, and 300 megawatts is still considered a large project. 30 gigawatts is 30, 000 megawatts. I know — it doesn’t really seem to make sense. It can’t be that large … right?

Well, there’s no way it’s a single standalone project — but this is apparently a real projects of sorts (series of renewable energy power projects in the same general area) that will reportedly total 30 GW. For some comparison, in total, all across the United States, from Florida to Hawaii, we have 49.45 GW of solar power capacity installed from large solar power plants (not including rooftop solar). India plans to have “one project” in one state total 30 GW — down a bit from the 41.5 GW we reported at the beginning of the month (unless that is simply a longer-term plan). India itself had only 42.8 GW of solar power capacity installed at the end of 2019. Only 5 countries had more than 30 GW of solar power capacity installed.

The Lightening SuperBike is the fastest production motorcycle in the world, clocking in at 218 MPH. (There are faster bikes, but none of them are street legal.) It recently won the Pikes Peak International Hill Climb, beating all competitors, including gasoline-powered bikes. But don’t ask how many cylinders its engine has — this bike is solar powered. Well technically it’s battery-powered, but it charges the batteries with solar energy.

^{Image: SMA America}

Continue reading “World’s Fastest Motorcycle is Solar Powered” »

Renewables keep on gaining steam. 😃

Improving the efficiency of solar cells can make a huge difference to the amount of energy produced from the same surface area and the same amount of sunshine, and another world record has been beaten in the push for better yields.

Researchers have now hit an efficiency of 29.15 percent in the perovskite/silicon tandem solar cell category, which is just one of several different types of cells. There are currently a variety of different technologies in use to convert solar energy into electricity.

Continue reading “Scientists Just Set a New World Record in Solar Cell Efficiency” »

Though there are many specific definitions of a microgrid, at its core a microgrid means the ability of a distributed energy resource, typically solar PV and battery energy storage, to both interact with the utility grid and stand alone with no utility. From a technical perspective, what are the key elements to achieve this functionality?

1) Managing the point of interconnection (POI) 2) Power equipment mode shifting.

/*** Advertisement ***/

A new tool that uses light to map out the electronic structures of crystals could reveal the capabilities of emerging quantum materials and pave the way for advanced energy technologies and quantum computers, according to researchers at the University of Michigan, University of Regensburg and University of Marburg.

A paper on the work is published in Science.

Applications include LED lights, solar cells and artificial photosynthesis.

A new type of energy-generating synthetic skin could create more affordable prosthetic limbs and robots capable of mimicking the sense of touch, scientists say.

In an early-view paper published in the journal IEEE Transactions on Robotics, researchers from the University of Glasgow describe how a robotic hand wrapped in their flexible solar skin is capable of interacting with objects without using dedicated and expensive touch sensors.

Continue reading “Energy-generating synthetic skin for affordable prosthetic limbs and touch-sensitive robots” »

Graphene, an atomically thin carbon layer through which electrons can travel virtually unimpeded, has been extensively studied since its first successful isolation more than 15 years ago. Among its many unique properties is the ability to support highly confined electromagnetic waves coupled to oscillations of electronic charge—plasmon polaritons—that have potentially broad applications in nanotechnology, including biosensing, quantum information, and solar energy.

However, in order to support plasmon polaritons, graphene must be charged by applying a voltage to a nearby metal gate, which greatly increases the size and complexity of nanoscale devices. Columbia University researchers report that they have achieved plasmonically active graphene with record-high charge density without an external gate. They accomplished this by exploiting novel interlayer charge transfer with a two-dimensional electron-acceptor known as α-RuCl3. The study is available now online as an open access article and will appear in the December 9th issue of Nano Letters.

“This work allows us to use graphene as a plasmonic material without metal gates or voltage sources, making it possible to create stand-alone graphene plasmonic structures for the first time” said co-PI James Hone, Wang Fong-Jen Professor of Mechanical Engineering at Columbia Engineering.

Austrian boatbuilder Silent Yachts has already gained a fair bit of attention with its solar electric catamarans. Its just-announced latest model should continue that trend, as it’s the result of a partnership with automakers Volkswagen and Cupra.

According to Silent Yachts, the as-yet unnamed solar-powered electric catamaran will feature the company’s own photovoltaic system. This will be used to charge batteries that will in turn provide power to the yacht’s onboard electronics, and to its electric propulsion system.

That system will be based around Volkswagen’s modular electric drive matrix (MEB) platform. MEB was initially designed as an optimized means of delivering power from a bank of chassis-integrated batteries to a motor on a car’s rear axle – the platform can also be set up for four-wheel-drive. Volkswagen has since made the technology available for third-party applications, hence its upcoming use for spinning the catamaran’s propellers.