Archive for the ‘bioprinting’ category: Page 7
Sep 14, 2020
Ultra-fast 3D bioprinter makes body parts in a flash
Posted by Shailesh Prasad in categories: 3D printing, bioprinting, biotech/medical
Volumetric Bioprinting
Recreating human body parts using a 3D printer. This is possible in the Netherlands with the new bioprinter developed by Utrecht University and UMC Utrecht. This printer can be used to make models of organs or bones, amongst other things. These printed models can be made up of living cells on which medication can be tested, for instance.
Conventional 3D printers work by stacking plastic layers on top of each other. This build-up of layers creates a three-dimensional figure. There are already countless possibilities with these standard 3D printers. Science has been looking for years at how this technique can be applied across different areas.
Continue reading “Ultra-fast 3D bioprinter makes body parts in a flash” »
Sep 11, 2020
Cryogenic 3D Printing Improves Bioprinting for Bone Regeneration
Posted by Malak Trabelsi Loeb in categories: 3D printing, bioengineering, bioprinting, nanotechnology
Researchers from China continue in the quest to improve methods for bone regeneration, publishing their findings in âCryogenic 3D printing of dual-delivery scaffolds for improved bone regeneration with enhanced vascularization.â
A wide range of projects have emerged regarding new techniques for bone regenerationâespecially in the last five years as 3D printing has become more entrenched in the mainstream and bioprinting has continued to evolve. Bone regeneration is consistently challenging, and while bioprinting is still relatively new as a field, much impressive progress has been made due to experimentation with new materials, nanotubes, and innovative structures.
Cell viability is usually the biggest problem. Tissue engineering, while becoming much more successful these days, is still an extremely delicate process as cells must not only be grown but sustained in the lab too. For this reason, scientists are always working to improve structures like scaffolds, as they are responsible in most cases for supporting the cells being printed. In this study, the authors emphasize the need for both âexcellent osteogenesis and vascularizationâ in bone regeneration.
Aug 28, 2020
Robot Skin 3D Printer Close to First-in-Human Clinical Trials
Posted by Malak Trabelsi Loeb in categories: 3D printing, bioprinting, biotech/medical, government, health, robotics/AI
In just two years a robotic device that prints a patientâs own skin cells directly onto a burn or wound could have its first-in-human clinical trials. The 3D bioprinting system for intraoperative skin regeneration developed by Australian biotech start-up Inventia Life Science has gained new momentum thanks to major investments from the Australian government and two powerful new partners, world-renowned burns expert Fiona Wood and leading bioprinting researcher Gordon Wallace.
Codenamed LigĆ from the Latin âto bindâ, the system is expected to revolutionize wound repairs by delivering multiple cell types and biomaterials rapidly and precisely, creating a new layer of skin where it has been damaged. The novel system is slated to replace current wound healing methods that simply attempt to repair the skin, and is being developed by Inventia Skin, a subsidiary of Inventia Life Science.
âWhen we started Inventia Life Science, our vision was to create a technology platform with the potential to bring enormous benefit to human health. We are pleased to see how fast that vision is progressing alongside our fantastic collaborators. This Federal Government support will definitely help us accelerate even faster,â said Dr. Julio Ribeiro, CEO, and co-founder of Inventia.
Jul 27, 2020
A Possible Weapon Against the Pandemic: Printing Human Tissue
Posted by Nicholi Avery in categories: bioprinting, biotech/medical
Bioprinting could be used for testing potential treatments for Covid-19, cancer and other diseases.
Bioprintingâs importance for pharmaceutical analysis is paramount now, not only for potential Covid-19 treatments, but also for testing treatments for cancer and other diseases. Dr. Atala says that the organoids allow researchers to analyze a drugâs impact on an organ âwithout the noiseâ of an individualâs metabolism.
He cited Rezulin, a popular diabetes drug recalled in 2000 after there was evidence of liver failure. His lab tested an archived version of the drug, and Dr. Atala said that within two weeks, the liver toxicity became apparent. What accounts for the difference? An organoid replicates an organ in its purest form and offers data points that might not occur in clinical trials, he said, adding that the testing is additive to, rather than in lieu of, clinical trials.
Jul 26, 2020
âMeat of the futureâ: KFC to â3D bioprintâ meat using âanimal flesh cellsâ
Posted by Brent Ellman in categories: 3D printing, bioprinting, food
Itâs happeningâŠ
MOSCOW â KFC has partnered with a Russian bioprinting company to bring 3D printed chicken nuggets to the table.
Coined as the âmeat of the future,â the lab-created chicken meat is KFCâs response to the growing interest of healthy lifestyles, the rise in demand for meat alternatives and the increasing need to develop more environmentally friendly methods of food production.
Jul 17, 2020
Printer lickinâ good: KFC is bioprinting chicken nuggets
Posted by Brent Ellman in categories: 3D printing, bioprinting, food
âThe partners are working together to develop the worldâs first laboratory-produced chicken nuggets. The 3D printed nuggets are expected to be similar in taste and appearance to KFCâs original product, but will have the benefit of being more environmentally friendly to produce.â
When I think of KFC and its largely unchanging menu of fried chicken, I do not immediately think of innovation. However a new collaboration forged between the fast-food company and Russia-based bioprinting firm 3D Bioprinting Solutions might just change my mind. The partners are working together to develop the worldâs first laboratory-produced chicken nuggets. The 3D printed nuggets are expected to be similar in taste and appearance to KFCâs original product, but will have the benefit of being more environmentally friendly to produce.
The bioprinted chicken nugget project is already underway, and the unlikely partners plan to have a final product ready for testing by this fall. The effort is part of KFCâs mission to create a ârestaurant of the futureâ which leverages state-of-the-art technologies like 3D bioprinting to overcome solutions in the food industry today: such as finding more eco-friendly alternatives to traditional meat.
Continue reading “Printer lickinâ good: KFC is bioprinting chicken nuggets” »
Jun 9, 2020
Video: Scientists grow a human ear with new, skin-crawling 3D printing method
Posted by Brent Ellman in categories: 3D printing, bioprinting, biotech/medical
Their new approach to 3D bioprinting and allows for non-invasive tissue growth and wound healing. It works through injecting bioink cells, the additive material traditionally used in 3D bioprinting, under the skin and using near-infrared light to penetrate the tissue and transfer customizable building designs â like an ear or an abstract shape â to newly injected cells.
The ear began to form in just 20 seconds.
Using a new approach to 3D bioprinting researchers have designed a way to non-invasively grow a wide range of customizable tissue under living skin.
May 23, 2020
Cellular Aquaculture â Feed The World and Save the Oceans â Lou Cooperhouse, President & CEO, BlueNalu â ideaXme â Ira Pastor
Posted by Ira S. Pastor in categories: 3D printing, bioengineering, biological, bioprinting, business, food, futurism, health, lifeboat, science
Feb 22, 2020
3D Printing of Body Parts Is Coming Fastâbut Regulations Are Not Ready
Posted by Paul Battista in categories: 3D printing, bioprinting
The future of bioprinting looks promising from a technical and scientific perspective, but itâs far from clear how it will be regulated.