Lifeboat Foundation

A Northwestern Engineering research team has developed a 3D printable ink that produces a synthetic bone implant that rapidly induces bone regeneration and growth. This hyperelastic “bone” material, whose shape can be easily customized, one day could be especially useful for the treatment of bone defects in children.

Bone implantation surgery is never an easy process, but it is particularly painful and complicated for children. With both adults and children, often times bone is harvested from elsewhere in the body to replace the missing bone, which can lead to other complications and pain. Metallic implants are sometimes used, but this is not a permanent fix for growing children.

“Adults have more options when it comes to implants,” said Ramille N. Shah, who led the research. “Pediatric patients do not. If you give them a permanent implant, you have to do more surgeries in the future as they grow. They might face years of difficulty.”

A 3D-printing company is aiding NASA by using its additive manufacturing technology to create an accurate replica of a meteorite located 34 million miles from Earth.

Measuring approximately 2 feet in length, the meteorite known as Block Island was first discovered on Mars by the Exploration Rover Opportunity in 2009. Studying it is an important part of furthering our knowledge about Mars and other planets, but at present the prospect of bringing it to Earth to examine u close is out of the question.

Fortunately, the Mars rover was able to take images and measurements to transmit back home, and this data has now been used by Mcor Technologies, an Ireland-based 3D-printing company, to create a life-size Block Island model.

Tiny sensors made through nanoscale 3D printing may be the basis for the next generation of atomic force microscopes. These nanosensors can enhance the microscopes’ sensitivity and detection speed by miniaturizing their detection component up to 100 times. The sensors were used in a real-world application for the first time at EPFL, and the results are published in Nature Communications.

The sensor is made up of highly conductive platinum nanoparticles surrounded by an insulating carbon matrix. (Image: EPFL)

Just like checking your bag on a commercial airline, space travel comes with some pretty big weight restrictions. How big? According to estimates, reaching space costs a whopping $10,000 per pound, which means that every ounce saved has a big impact on the bottom line.

That’s where a group of Danish researchers comes in. The team is working on a synthetic biology project called CosmoCrops, which hopes to use bacteria to make it possible to 3D print everything needed for a respectable space mission, using a cutting-edge co-culturing system. And it could even make life better for those of us back on Earth in the process.

“We are trying to make space exploration cheaper, because many inventions we use in our daily life were invented because of space exploration, like Velcro and solar energy,” Joachim Larsen, one of the students working on the project, told Digital Trends. “The way we want to achieve this is to [be] able to produce everything from food to medicine and bioplastic for 3D printers out in space — making the space rocket a lot lighter.”

A 3D printed house, does it really exist? Here are the most fascinating 3D printed houses in the world, from tiny town cabins to an entire village.

“What’s wrong with brick and mortar, glass and concrete?”, you might ask. “Why to build a 3D printed house?” Apart from the obvious answer – because we can -, there are various good reasons for using 3D printing methods in constructing buildings:

3D print circuits with Electrifi Conductive 3D Printer filament. With a resitivity of 0.006 Ω cm, Electrifi is the only 3D printer filament on the market that can truly be called conductive. The filament extrudes at a temperatures between 140–160 ºC, with a recommended printing speed of 15–45 mm/s. Electrifi is currently available with a diameter of 1.75 mm. Please see our website for detailed tutorials on how to use Electrifi in a 3D printed electronics project. Due to the high conductivity of the filament, it can be used to produce many different types of circuits, including LED signs, LED matrix display, Bluetooth lamps, interfacing different types sensors with Arduino, electronic games, gaming controllers, and digital music devices to name just a few examples. If the circuit can be run with resistor of 10 ohm or greater, it can likely be made with Electrifi. Electrifi can also be used to make EMI/RF shielding, RF antennas, RF Filters, and other custom RF components. Electrifi is shipped in a vacuum-sealed package with a desiccant packet. The filament should be stored in a cool, dry environment, and exposure to moisture should be minimized.

Definitely many benefits to 4D including manufacturing, tech devices, and energy.

A team of researchers has uncovered the key to what they call 4D printing – and solar energy may be one of the top 2 fields to benefit from the great invention.

Continue reading “4D Printing: Shaping The Future of Solar Cells” »

I remember several years ago when me and another peer at Microsoft discuss and presented the impact of 3D Printing would have across various industries and how SCM and even PLM would change forever. Nice to see the revolution in play.

PSA Group said it has agreed a partnership with a Los Angeles-based 3D printing startup to develop metal printing processes for PSA production lines. The automaker said the deal could lead to cheaper production of whole vehicle structures as well as parts for its models.

3D printing obviously has many advantages, but energy efficiency is one that is rarely mentioned. In fact, depending on the application and scale, 3D printing produces far few carbon emissions than many other manufacturing options. In an attempt to harness that advantage, the luxurious Dutch Hotel De Slaapfabriek from Teuge is planning to build a unique, 3D printed and zero-footprint conference location that provides a highly inspiring and modern environment. Construction is scheduled to kick off in July 2017, and could be completed in as little as ten days. If successful, it could pave the way for a new environmentally-friendly construction 3D printing paradigm.

This forthcoming structure could not have picked a more inspiring location in the Netherlands. De Slaapfabriek is a luxurious experience hotel in Teuge, The Netherlands (very near to International Airport Teuge in Gelderland). With unique twelve rooms available to clients, it’s a premier location for honeymoons and business trips. Since opening its doors in 2009, De Slaapfabriek has also won award after award, and currently boasts a Booking.com appreciation score of 9.3. The only thing that’s missing is a conference location, and when necessary the luxury breakfast and lounge area is transformed into a conference room. But this is not the best solution, and founders Arvid and Marjo Prigge developed an ambitious plan: to construct a completely new, environmentally-friendly conference location.

Continue reading “Hotel de Slaapfabriek to construct Europe’s first zero-footprint 3D printed building in 2017” »